From: david.rance@SPAMOFFrance.org.uk   
      
   On Thu, 18 Sep 2003, Xroads 2003 wrote:   
      
   >TIPX is an option module driver for TBBS, when you set up each line in CEDIT   
   >and tell it's a IPAD line, then it will load TIPX for that line.   
   >TIPXI14 is meant to allow drop to DOS stuff, but I can't get that to work,   
   >so I just don't bother with it.   
      
   Of course! You're right. I got them the wrong way round! It's TIPX that   
   is loaded with TBBS. TIPXI14 is the slave which I use when logging in to   
   TBBS from across the LAN.   
      
   >Here is my network start up   
   >   
   >C:\NET\LSL   
   >C:\NET\E100BODI   
   >C:\NET\IPXODI   
   >C:\NET\VLM   
   >   
   >the second line is for my Intel Pro 100 card otherwise the same should be in   
   >your setup. I have tried other versions of IPX on DOS but this works best.   
   >I have also tried getting TCP/IP working together but no luck, the best I   
   >can do is a BOOT menu that has one or the other.   
      
   Yes, well I have IPX working OK on the BBS computer under DOS. I, too,   
   can't get both IPX and TCP/IP working together on the same machine -   
   which makes it a problem on the Internet machine. That *has* to have   
   TCP/IP enabled. But does TIAD have its own IPX stack or do I have to   
   load IPX on the machine that runs TIAD?   
      
   Or have I misunderstood completely and TIAD has to be loaded on the TBBS   
   machine?   
      
   Best wishes, David   
   --   
   +-------------------------------------------------------+   
   | Internet: david.rance@rance.org.uk     | writing from |   
   | Fidonet:  David Rance 2:252/110        | Caversham,   |   
   | BBS:      telnet://mesnil.demon.co.uk  | Reading, UK  |   
   +-------------------------------------------------------+   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)