From: krishna.myneni@ccreweb.org   
      
   On 11/1/24 09:18, Krishna Myneni wrote:   
   > The RS232 serial port interface for kForth (-32/64 for Linux) has been   
   > updated to be able to provide user access to the modem bits e.g. DSR,   
   > CTS etc.   
   >   
   > https://github.com/mynenik/kForth-64/blob/master/forth-src/serial.4th   
   > ...   
      
   serial.4th has been updated to open USB -> RS232 devices also. These   
   have device names /dev/ttyUSB0  /dev/ttyUSB1  etc. The predefined port   
   constants USBCOM1 and USBCOM2 map to these dev interfaces. A word of   
   caution -- if you have more than one USB->RS232 adapters, they may not   
   map to the same /dev/ttyUSBx interface each time the system is booted.   
      
   Also, please make sure to add the user to the dialout group in order to   
   have permissions for read/write access to both the UART and USB serial   
   interfaces (/dev/ttySx and /dev/ttyUSBx).   
      
   --   
   Krishna Myneni   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)