From: bowman@montana.com   
      
   On Fri, 2 Jan 2026 21:19:46 -0500, c186282 wrote:   
      
   >   How'd you get the plastic stretched back tight ?   
      
   Heat gun. It requires a light touch or you melt the vinyl but the backing   
   material has some stretch. I started in the middle, stapled the material   
   to the pan, and worked towards the ends.   
      
   >    My Sportster seat was pure torture. That's why I fitted a Ural bench   
   >    seat instead.   
      
   I developed an interest in roadside attractions before replacing it with a   
   Mustang.   
      
   https://mustangseats.com/products/wide-touring-solo-for-harley-davidson-   
   sportster-2004-2022   
      
   I didn't get the backrest. It was a vast improvement. Another mystery in   
   life is how HD can build something that looks like a seat but is a torture   
   device when third parties can supply something comfortable.   
      
   Mine had conchos but so did the LeatherLyke hard saddlebags so it didn't   
   look too strange. It's pretty ratty now so I put the original ass buster   
   back on. It works for around town.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)