From: ptgm.janssen@hetnet.nl   
      
   Hello,   
      
   I'm unfamiliar with port forwarding and have a problem to set up my Iomega   
   NAS for Personal Cloud:   
   In the manual of the Iomage (Home Media Network Hard Drive Cloud Edition)   
   is this the information:   
       The following information is needed to manually configure your router:   
        Device IP Address — 192.168.2.15   
        Port Name — HTTPS   
        Port number — 443   
        Protocol — TCP   
      
   Also the popup ("router not configured for port forwarding") :   
       Port Forwarding (NAT-PMP)   
        You must manually configure your router to forward a specific port to   
   your Home Media Network Hard Drive.   
        IP Address: 192.168.2.15   
        Port: 50500   
      
   I swith of my Firewalls of Windows, Norton Internet Security and my router.   
   In my ADSL modem (Thomson ST5x6v6) I can not switch this off.   
   I can set: Protocol (to TCP); Port range (to 443-443) Translate to..   
   (50500-50500);   
   Trigger Protocol (TCP); Trigger Port (50500).   
   I link this definition to the IP of the NAS: 192.168.2.15   
   uPnP is on.   
      
   HELP! How do I set up this Port Forwarding!? How does this Port Forwarding   
   work?   
      
   Paul   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)