Hell All,   
      
      I have a strange problem on my network.  I have two  Huawei Quidway R1760   
   routers that are linking our two offices, I and at subnet 192.168.0.0 and our   
   satellite office is 192.168.1.0.  Problem number one no one knows the   
   passwords for the routers.   
      
      In November last year I noticed that the ARP table at the B site,   
   192.168.1.0, was full, but the thing is most of the entries were similar to   
   Inet 192.168.1   .8   00-00-00-00-00-00 Dynamic Enternet0   
   Inet 192.168.1   .19   00-00-00-00-00-00 Dynamic Enternet0   
   Inet 192.168.1   .3  00-00-00-00-00-00 Dynamic Enternet0   
      
     PC's that were on and connected when the router was rebooted had a   
   reservation in the ARP table but any new devices that attached to the network   
   after the reboot could not get an ARP entry and there for could not   
   communicate with the A site.    
      
     I traced the fault to most of the PC's at the A site. So I block all of the   
   PC's from communication with the b site, except our servers and a few   
   printers.  The cleared the issues, kind of because I still do not know what is   
   causing this issue, but the    
   B site could work.   
      
      This morning I saw that the table was full again, I have now found that one   
   of the printers is causing the issue.  I blocked the printer from access the B   
   site and the table cleared up, without a reboot.   
      
   Please has any one got any advice on this for me.   
      
   Thank you   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)