From: nelsonse48@gmail.com   
      
   On Monday, April 12, 2021 at 6:24:13 PM UTC-5, Craig Ruff wrote:   
   > In article ,   
   > Steven Nelson  wrote:    
   > >My workhorse IIGS died today. Worked fine yesterday. Rom01, CFFA3000   
   (#1),ZipGS 8/64 (#2), VidHD (#3),    
   > >Uthetnet II (#4), Superdrive controller (#5, inactive), empty (#6),   
   Hi-speed SCSI (#7, inactive). Lights on    
   > >CFFA, ZipGS, UthernetII active when powered on.   
   > >gives no beep.    
   >    
   > Can you remoe the ZipGS and try the stock configuration?   
   > >    
   > >I checked power supply which gives good +/-5v and +/- 12v readings.   
   > Did you check this under load while it was connected to the motherboard?   
      
   Thank ypu Craig.  Replaced ZipGS with 65816 DIP.  Not much change.  Tested PS   
   under load.  Not good!  Disassembled PS and found blown capacitor (1000uF?) in   
   DC end.  (Reactive Micro universal power supply kit less than a year old.)  I   
   will try replacing    
   capacitor but my soldering skill sucks ;-).  My other GS (rom3) died the same   
   day.  Its old PS gave up the ghost too.  Not my day.   
      
   Take care.  Apple2-4FR.   
     --Steven   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)