From: rdarlington@gmail.com   
      
   On Tuesday, September 18, 2018 at 7:59:01 AM UTC-6, a2retro wrote:   
   > Just an FYI : I happen to be looking at teh Apple IIgs #28   
   > Interface Card Design Guidelines and noticed the dimensions of the standard   
   50 pin slot connector are wrong.   
   >   
   > They are listed as 2.95 inches when it should be 2.59 inches   
      
   I confirm the technical docs are WRONG.   2.590" to 2.600" seems fine.  My   
   Mockingboard is 2.600 (or was it the Uthernet?).   
      
   -Bob   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)