From: justliketomsthumbsblues@gmail.com   
      
   On Tuesday, July 26, 2022 at 6:33:07 PM UTC-4, waynej...@gmail.com wrote:   
   > UDC cards seem to vary in whether the eject button works. On one of mine it   
   never worked so I hooked the eject button up to the eject motor and used it   
   that way for a few years    
   > Also had a program that I used in ProSel 8 to eject disks   
      
   Hmm, I guess I need to take this to comp.sys.apple2.programmer. I'm not   
   proficient at apple II assembly; I have a IIgs, //e, and IIc, all working, and   
   I think a complete library of technical references, tech notes and such for   
   all of them and so far am    
   not successful issuing a SmartPort call. I've seen David Empson's old posts on   
   the matter but find it hard to understand his posted code. I'll work at it a   
   bit more and then seek more advise in comp.sys.apple2.programmer.   
      
   Somewhat annoyed I'm not clever enough to figure it out.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)