From: toddholcomb6@gmail.com   
      
   On Friday, July 22, 2022 at 8:13:10 PM UTC-5, Joseph Navarro wrote:   
   > Has anybody been able to setup a MacSD SCSI on an Apple2GS. The closest I   
   have been is on a ROM03 but not quite. It keeps asking to install the SCSI   
   drivers. I'm using GSOS 6.0.4 with SCSI drivers for a Hard Drive.   
   >   
   > The SCSI cards tested so far was the RAMFast Rev. C & GGLabs SCSI.   
   >   
   > The MacSD.ini has 4 drives setup:   
   > ID0: ProDOS0 (32MB)   
   > ID1: ProDOS1 (32MB)   
   > ID2: HFS2 (2GB)   
   > ID4: HFS3 (2GB)   
   >   
   > There is no Termination on the SCSI chain except what is provided by the   
   MacSD.   
   >   
   > Any help would be greatly appreciated.   
      
   The first SCSI device read is the highest ID, so try reversing your order.   
      
   Todd   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)