From: ewerst@msn.com   
      
   On Sunday, December 11, 2022 at 12:28:17 AM UTC-6, Eric Labelle wrote:   
      
      
   > Hi Tommy, and everyone.    
   >    
   > What a coincidence that you wrote just last week in this group. Someone   
   mentioned to me that further instructions to re-compile your code was   
   available somewhere and I found it here.    
   >    
      
      
   > While my main interest is on the WIZARDRY.CODE, which works, I have errors   
   compiling STARTUP.TEXT though on WIZ1E.DSK:    
   >    
   > USES CHAINSTUFF <<<<    
   > Line15, error 187:….    
   >    
   > SETCHAIN <<<<    
   > Line 1283, error 104:…    
   >    
   > SETCHAIN <<<<    
   > Line 1283, error 59:…    
   >    
   > SETCHAIN <<<<    
   > Line 1283, error 51:…    
   >    
   > P.S. I see Didier wrote in this forum… we must get in touch about   
   “Sorcellerie”!    
   >    
   > Eric   
      
      
   Hi Eric,   
      
   I don't know if I posted my instructions earlier for compiling STARTUP.TEXT,   
   but just now after many years, I looked in my spreadsheet and found my own   
   instructions for compiling STARTUP.TEXT.   Hopefully the formatting will look   
   ok since copy/pasting    
   from an  Excel spreadsheets inserts "tab" characters between columns.   
      
   I used my modified AppleWin with 4 disk drives.  I believe SETCHAIN is part of   
   the Pascal "intrinsics".     
      
   I hope this helps!   
      
   Tommy   
      
   					   
   Build Instructions:					   
   	Insert disks into drives:				   
   		4:  01 EDIT.DSK			   
   		5:  10 WIZ1E.DSK      (STARTUP source)			   
   		11: 02 COMPILE.DSK			   
   		12: 16 WizardryDotCode.dsk			   
   					   
   	Delete PRINTER.TXT on my computer.				   
   	Set AppleWin printer to APPEND				   
   					   
   	Boot 01 EDIT.DSK				   
   	S)wap ON  ("Y")				   
   	F)iler 				   
   		E)xtended #12:			   
   			R)emove		   
   			STARTUP.CODE and any other files.  Should show < UNUSED > 274  6		   
   		E)xtended #5			   
   			R)emove		   
   				remove ALL ".CODE" files	   
   				"#5:=.CODE"	   
   			K)runch to end of disk.		   
   			E)xtended Dir		   
   				STARTUP.TEXT	   
   				WIZUTILB.TEXT	   
   				WIZUTILC.TEXT	   
   				TITLELOA.TEXT	   
   				OPTIONS.TEXT	   
   				LZDECOMP.TEXT	   
   				CHKSYNCH.TEXT	   
   				SCREENPT.TEXT	   
   				< UNUSED >   166  114	   
   	A)ssem				   
   		Assemble what text?			   
   			#5:LZDECOMP		   
   		To what codefile?			   
   			$		   
   		Output file			   
   			PRINTER:		   
   	A)ssem				   
   			#5:CHKSYNCH		   
   			$		   
   			PRINTER:		   
   	A)ssem				   
   			#5:SCREENPT		   
   			$		   
   			PRINTER:		   
   	C)ompile				   
   		Compile what text?			   
   			#5:STARTUP		   
   		To what codefile?			   
   			$		   
   	L)ink				   
   		Host file?			   
   			#5:STARTUP		   
   		Lib file?			   
   			#5:LZDECOMP		   
   		Lib file?			   
   			#5:CHKSYNCH		   
   		Lib file?			   
   			#5:SCREENPT		   
   		Lib file?			   
   					   
   		Map file?			   
   					   
   		see:			   
   			Reading WIZBOOT		   
   			Reading LZDECOMP		   
   			Reading CHKSYNCH		   
   			Reading SCREENPT		   
   		Output file?			   
   			#12:STARTUP		   
   		see:			   
   			Linking UTILS     #7		   
   			Linking TITLELOA #8		   
   			Linnking OPTIONS #9		   
   			Linking WIZBOOT #1		   
   			 Copying proc LZDECOMP		   
   			 Copying proc CHKSYNCH		   
   			 Copying proc SCREENPT		   
   	T)ransfer				   
   		#12:STARTUP.CODE			   
   	to:				   
   		#5:STARTUP.CODE			   
   	C)hange				   
   		#5:STARTUP.CODE			   
   		#5:SYSTEM.STARTUP			   
   					   
   	Eject disk "16 WizardryDotCode" from #12:				   
   	Insert "16 WizardryDotCode.DSK" into #5:				   
   	Insert "05 DeCompile.DSK" into #4:				   
   	Reboot				   
   		"Y" for all			   
   	Output from all the steps above should be in PRINTER.TXT on my computer.				   
   	To find start of PASCAL code, search for "PRINTER:".				   
   	To find start of pCode, search for "jtab".				   
   	Copy pCode to Wizardry1StartupPcode.txt				   
   	Use WINDIFF to compare pCodeProvGrnd STARTUP.txt to Wizardry1St   
   rtupPcode.txt				   
   					   
   Tommy   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)