From: waynej...@gmail.com   
      
   Normal behavior?   
   I recently acquired a PAL IIe so I haven’t used it much. Plugging into a   
   NTSC monitor I get greyscale as expected. I’m using a Ramworks with VGA   
   extender for video and I upgraded it with enhanced ROMs & a 65C02. It passes   
   the self test. It boots off    
   5.25” floppy disks normally.   
   What I tried that works:   
   MDT, Vulcan, Apple Rev C, Hi-Speed SCSI, Booti, CFFA 3000, Superdrive card.   
   Problems with:   
   The Focus drive boots to the IIe startup screen and stalls there. If I do a   
   Control-Reset and type PR#7 it boots up normally. Same with two different   
   Focus cards. Tried different slots. With a Transwarp installed the Focus   
   drives work normally. Ramfast    
   SCSI cards rev C & D lock up when searching the SCSI bus. If I start from a   
   Ramfast utility disk I get to the Ramfast utility screen where it seems to   
   lock up. On the Ramfast rev C I’ve tried with the DMA off.   
   I recall mention that some cards had problems with the PAL IIe. Wondering if   
   this is one.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)