home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   comp.sys.apple2      Discussion about Apple II micros      56,720 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 56,234 of 56,720   
   fadden to Charlie   
   Re: introducing minisound GS   
   21 Jul 23 08:00:12   
   
   From: thefadden@gmail.com   
      
   On Friday, July 21, 2023 at 6:36:06 AM UTC-7, Charlie wrote:   
   > All three addresses work for me with Firefox version 115.0.2 64 bit.    
      
   I got:   
      
   "This site can’t be reached   
   minisoundgs.000webhostapp.com took too long to respond"   
      
   Chrome auto-retried a couple of times and eventually the 000webhostapp.com   
   link went through.   
      
   "Installation   
   Insert the daughterboard by aliging the 7 pin female header with the sound   
   connector located at the front right of the Apple IIGS. Press down from the   
   top of the board (SV1) so as not to torque the board (use thumb pressing at   
   right edge to avoid    
   discomfort from soldered pins). Make sure the 7 pin female socket is aligned   
   with the seven pins of the IIGS's sound connector, as there is no protection   
   to prevent an offet. Connect the provided jumper wire with the red wire on the   
   left to the fan    
   connector. Connect the jumper wire with black to the left (indicated GND) on   
   JP4 at rear of board. If polarity reversed will not cause harm and just wont   
   work. Connect your fan making sure power is closest to the front edge of the   
   board at JP3 (+12V and    
   GND indicated). Connect your headphone jack at the rear of the board."   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca