From: md@md.com   
      
   "Rodolphe Czuba"  wrote:   
   >INFO : it will possible to cut the PCI slots board to use only 3 or 2   
   >slots.   
   >It will be possible too to cut for only 1 slot BUT you will need to   
   >solder a big wire between CT60/63 & the PCI slot to furnish the +3.3V.   
   >   
   >Some modifications on the CTPCI and the ATX tower drilling draft is   
   >available in the technics area :   
   >http://www.czuba-tech.com/CTPCI/english/welcome.htm   
   >   
      
   I really really wish the ribbon connectors were behind the PCI slots   
   rather than beside.  In my case layout they are encroaching the motherboard   
   area whereas behind hte pci slots i Have plenty of room.  :-/   
   --   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)