From: rodxxxxx.xxuba@free.fr   
      
   Hello,   
      
   Your suggestion is excellent !   
   But why did you crite here instead of directly to me ?   
   I read just now and it is very late now to change...   
      
   I will try.   
      
      
      
      
   Mark D wrote:   
   > "Rodolphe Czuba"  wrote:   
   >> INFO : it will possible to cut the PCI slots board to use only 3 or 2   
   >> slots.   
   >> It will be possible too to cut for only 1 slot BUT you will need to   
   >> solder a big wire between CT60/63 & the PCI slot to furnish the   
   >> +3.3V.   
   >>   
   >> Some modifications on the CTPCI and the ATX tower drilling draft is   
   >> available in the technics area :   
   >> http://www.czuba-tech.com/CTPCI/english/welcome.htm   
   >>   
   >   
   > I really really wish the ribbon connectors were behind the PCI slots   
   > rather than beside.  In my case layout they are encroaching the   
   > motherboard area whereas behind hte pci slots i Have plenty of room.   
   > :-/   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)