From: darklord@suddenlink.net   
      
   On Sun, 01 Feb 2009 07:58:12 +1100, Mark Bedingfield wrote:   
      
   > The best solution is desolder and fit a socket,   
   > then fit a new chip.   
      
   Because I'm a klutz at soldering anything so fine as what seems to be on   
   the Falcons motherboard, and I didn't want to ruin anything, I had this   
   done by Alex Yu at ATY Computers, here in the US. Parts came from Brad   
   Coda at Best Electronics.   
      
   Now, if the clock goes dead on my Falcon again, I can replace it myself. :)   
      
   --   
   Welcome To DarkForce! www.darkforce.org "The Fuji Lives.!"   
   An Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)