From: Uwe.Seimet@seimet.de   
      
   phantomm wrote:   
      
   > I have a SCSI 50 pin Matsushita, Model No. LF-D101N.   
   > Was thinking of using it on a Falcon or MegaSTE.   
   >   
   > Does HD Driver support this model?   
      
   It should, since there is no restriction on the SCSI devices supported   
   by the SCSI driver included in current versions of HDDRIVER. Just run an   
   ID check and check the termination in case the device is not found.   
   Also ensure that SCSI initiator identification is enabled and that the   
   drive does not have the same SCSI ID as the Falcon.   
   As far as the MegaSTE is concerned a LINK96/97 is required for some SCSI   
   devices. Some devices require the computer to have an SCSI ID of its own   
   (which is mandated by the SCSI standard) in order to work properly.   
      
   --   
   -----------------------------------------------------------------------   
     Dr. Uwe Seimet                           http://www.linkbylink.net/   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)