1d6dcbcb   
   From: houten.van@orange.fr   
      
   atarigalen@yahoo.com a écrit :   
      
   > The STacy expects an input between 10.6 and 18VDC. (The STacy has a   
   > 'power low' light   
   > that comes on around 11.5V.  However, the STacy keeps running until   
   > somewhere around 10.5V).   
      
   	Great!   
   	I have used the Compaq power unit (16V 2,5A) and it works great!!   
   	Not too noisy, the display is a bit dark even with full brigthness, the   
   trackball is better than the pads on the new laptops.   
      
   	I have another question:   
   	This Stacy has a 20Mb hard drive, and I have a 160Mb SCSI that I wanted   
   to fit in...   
      
   	The problem is that, even with all screws removed, I can't open the   
   computer, something seems to maintain it around the Floppy+HD block.   
   It opens well around the keyboard, on the left side too, but not on the   
   back right).   
   	(I have removed the screws under the Stacy and the two on the back   
   side). I don't want to break something!   
      
   	And another other one:   
   	The two ROM chips are really easy to reach, can you confirm that I   
   could put a TOS 2.06 ??   
      
   	Guillaume.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)