From: phantomm@bellsouth.net   
      
   "Uwe Seimet"  wrote in message   
   news:79bj2pF1q5th7U1@mid.individual.net...   
   > phantomm wrote:   
   >   
   >> I have a SCSI 50 pin Matsushita, Model No. LF-D101N.   
   >> Was thinking of using it on a Falcon or MegaSTE.   
   >>   
   >> Does HD Driver support this model?   
   >   
   > It should, since there is no restriction on the SCSI devices supported   
   > by the SCSI driver included in current versions of HDDRIVER. Just run an   
   > ID check and check the termination in case the device is not found.   
   > Also ensure that SCSI initiator identification is enabled and that the   
   > drive does not have the same SCSI ID as the Falcon.   
   > As far as the MegaSTE is concerned a LINK96/97 is required for some SCSI   
   > devices. Some devices require the computer to have an SCSI ID of its own   
   > (which is mandated by the SCSI standard) in order to work properly.   
   >   
   > --   
   > -----------------------------------------------------------------------   
   >  Dr. Uwe Seimet                           http://www.linkbylink.net/   
      
   Thanks, much appreciated.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)