From: joska@nvg.ntnu.no   
      
   phantomm  wrote:   
      
   > > If I still had a Stacy I would upgrade it to 4Mb, add an IDE interface   
   > > and replace the HD with a CF-card. Then I would leave it alone :-)   
      
   > What type of IDE interface? Where can I get one? 8-)   
      
   Nowadays I think you have to build one yourself... Another option would   
   be a SatanDisk connected to the internal ACSI-connector. Then you can   
   get rid of the ancient SCSI-disk and the SCSI interface.   
      
   You can also replace the EL backlight with a reflective sheet and some   
   LEDs. If you do this you get rid of the two major power consumers in   
   the Stacy - the disk and the backlight. Fitting a battery might make   
   sense now :-)   
      
   > Did yours have a Bus Connector?   
      
   I don't know, I don't own a Stacy anymore. I had three, sold two and   
   broke one :-/   
      
   > My board has a place for one, is it as easy as soldering in the Bus   
   > connector or are   
   > there more componets that would need installing?   
      
   I have no idea, but if it's the same as the Mega ST bus then there are   
   some buffers involved.   
      
   What do you want to connect to this bus?   
      
   --   
      
   /*   
   ** Jo Even Skarstein   http://joska.nvg.org/   
   */   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)