On Sunday, April 14, 2013 2:30:56 PM UTC-4, Barry wrote:   
   > Can one simply change the drive Mech out of an Atari 354 disk drive and   
   >   
   > get a DS/DD Drive, if thats the type of Mech you put in it???   
   >   
   >   
   >   
   > The Atari 354 is a single sided drive asfaik.   
   >   
   >   
   >   
   > Also, if you put a 1.44 Mech into a Atari 354 drive, would it work as a   
   >   
   > DS/DD on   
   >   
   > a 1040STE,  But if you connected it to a MEGA STE as a second drive, would   
   >   
   > it work   
   >   
   > as a DS/DD and or a 1.44 Drive, especially if the Mega STe has the 1.44   
   >   
   > internal drive?   
   >   
   >   
   >   
   > Or does something else need to be done.   
   >   
   >   
   >   
   > Barry   
   >   
   > phantomm@suddenlink.net   
      
   most ibm drives are set too drive b   so you need to set it to drive A  all   
   all later disk drives for ibm do this with the cable.   
   try to find a drive with < A -B > on it  try a 720k drive from a apple.   
   some 1.44 drives will not work on a stf - stfm -ste. // megaste may work in   
   720k   
   only.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)