Forums before death by AOL, social media and spammers... "We can't have nice things"
|    comp.sys.cbm    |    Discussion about Commodore micros    |    53,866 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 51,966 of 53,866    |
|    6502enhanced@gmail.com to All    |
|    Re: Using tcpser on a Pi for telnet gate    |
|    10 Jun 17 23:13:16    |
      Hi,              I do have a similar problem with tcpser and the Raspberry PI.              Excuse - it is about a connection between the PI and an Apple II :-) ... hope       that's also ok here.              The problem is that tcpser works, but after about 10-20 hours it shuts down.       The Terminal Window is still open and I can start it again. Then it is working       all right but the same shutdown again after the same time?              My setup:              Raspberry PI 2 Model B       Debian       Raspberry WiFi Stick       USB to serial adapter (USB0)       tcpser       Apple II connected to serial adapter              I installed tcpser with:              sudo apt-get install tcpser              Started tcpser with:              tcpser -s 2400 -d /dev/ttyUSB0 -p 6502 -ts -B /scripts/busy.txt -N       /scripts/offline.txt              As said, tcpser is running well, I can telnet to my Apple II - everything       works fine. But after a few hours the connection in the Terminal Window is       shut down. I start it again - working fine - after a few hours the same?              Thanks for any help!              --- SoupGate-Win32 v1.05        * Origin: you cannot sedate... all the things you hate (1:229/2)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca