From: ank@spamfence.net   
      
   On Sat, 10 Jun 2017 23:13:16 -0700 (PDT), 6502enhanced@gmail.com wrote:   
   >   
   > I do have a similar problem with tcpser and the Raspberry PI.   
   >   
   > Excuse - it is about a connection between the PI and an Apple II :-) ...   
   hope that's also ok here.   
   >   
   > The problem is that tcpser works, but after about 10-20 hours it shuts   
   > down. The Terminal Window is still open and I can start it again. Then   
   > it is working all right but the same shutdown again after the same   
   > time?   
   >   
   > My setup:   
   >   
   > Raspberry PI 2 Model B   
   > Debian   
   > Raspberry WiFi Stick   
   > USB to serial adapter (USB0)   
   > tcpser   
   > Apple II connected to serial adapter   
   >   
   > I installed tcpser with:   
   >   
   > sudo apt-get install tcpser   
   >   
   > Started tcpser with:   
   >   
   > tcpser -s 2400 -d /dev/ttyUSB0 -p 6502 -ts -B /scripts/busy.txt -N   
   /scripts/offline.txt   
   >   
   > As said, tcpser is running well, I can telnet to my Apple II -   
   > everything works fine. But after a few hours the connection in the   
   > Terminal Window is shut down. I start it again - working fine - after   
   > a few hours the same?   
      
   Is there a (error) message in the terminal?   
      
   If not you could also add "-l 7" which puts out maximal logging messages.   
   --   
   Andreas   
   You know you are a redneck if   
   there are more fish on your wall than pictures.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)