From: carl.reilly@gmail.com   
      
   On Wednesday, June 28, 2017 at 11:50:54 AM UTC-6, 6502en...@gmail.com wrote:   
   > Thanks a lot!   
   >   
   > It seems that all is now working!   
   >   
   > I've put the "fi" in and then at the prompt I typed "./startSerial" - and   
   then tcpser started. So I hope that CRON Table is now also working and will   
   start the startSerial script if tcpser stops again.   
   ....   
      
   Interesting.  The fi on mine is only required when there's an else included   
   with the if/then...   
      
   To check if the cron is working, check the log or kill the tcpser service or   
   just restart the pi and check to see if it loads up.   
      
   Cheers,   
   c   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)