From: rami.saarinen@gmail.com   
      
   On Sunday, July 30, 2017 at 7:26:50 AM UTC+3, Pekka Takala wrote:   
   > On 29.07.2017 11:42, Rami wrote:   
   > > Hello fine Commodore people,    
   > >    
   > > I have Commodore MPS 803 printer (I think it is 803, it is in the storage   
   at the moment) and have been toying with the idea of hooking it up to   
   Raspberry Pi or similar... And later maybe even add a CUPS driver and allow   
   remote printing.    
   > >    
   > > I think I did try to dig up information for this couple of years ago and   
   came to understand that the printer serial protocol is non-standard and   
   documentation for it is hard to find. Someone also mentioned some Nuts and   
   Volts article but I was unable    
   to get it from the publisher.    
   > >    
   > > So I would appreciate any information on C64 serial printer protocol /   
   modern tools / github repos / whatever you can provide.    
   > >    
   > > Thanks!    
   > >    
   > >    
   > The protocol is essentially the same protocol as commodore 1541 disk   
   > drive protocol is. The printer just uses device number 4 instead of 8.   
   >    
   > Trust me, it is much easier to find a suitable matrix printer for your   
   > PC than to attach the commodore printer to your pc. The cbm protocol is   
   > very tight in timing.   
   >    
   > Sell the printer to someone c64/vic20/c128 enthusiast.   
      
   Thanks Pekka. If the timing is as tight as you say I might just let this be   
   for now. The idea was basically just hook up something almost useless to   
   modern computer setting for fun and laughs.   
      
   I do have (I think) two Commodore 64s (and 2*A500, A500+ and A1200) so I think   
   I keep the printer, find some continuous feed paper for it and hook it up to   
   C64. :)   
      
   --    
   Rami   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)