Hi folks,   
   I have a little question: I know that you can connect a teletype to the RS232   
   on the userport. You also can set the port to 50 baud, 5 bit with 1 Startbit   
   and 2 Stopbits.   
      
   Is it possible to redirect all text that ist normally shown on the monitor to   
   the teletype and use it as a printer? I woould like to run some text   
   adventures over the C64 on the teletype for Maker Faire.   
      
   Since the C64 still has the capability to operate with TTY that should be   
   possible.   
      
   Thanks for your advise.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)