From: Pancho.Jones@proton.me   
      
   On 10/04/2024 11:50, Mike Scott wrote:   
   > Hi all. Two separate projects which will need a relay of some sort to   
   > run from a Pi or similar.   
   >   
   > I'm really looking for something plug-and-go rather than build-your-own   
   > (especially item 2 below)   
   >   
   > First is a dpdt relay to switch around 12-20 V at a couple of amps. spdt   
   > are easy to come by; the only dpdt ones I've found are on aliexpress,   
   > but their longevity is possibly open to question :-{   
   >   
   > Second is something to switch mains safely - a full 13A to run a 3kW   
   > heater. I've drawn a blank: best I can think of is to butcher one of   
   > those wireless mains switch modules, which would at least provide a good   
   > isolation gap :-)   
   >   
      
   I've got lots of the wireless mains plug/sockets. I felt that my   
   competence level demanded a good isolation gap ;-).   
      
   Generally they have been good. A couple of caveats:   
      
   1) Try to get ones with Tasmota pre-installed (Some are flashable, but   
   this can be difficult). i.e. This gives you control purely in your own   
   LAN. You don't want to rely on some cloud service in China.   
      
   2) I have seen comments about them breaking at high wattage. I have used   
   one on a 2.4 kW fan heater. It worked fine, but that was for short   
   periods, not all day, every day.   
      
   > TIA for any ideas.   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)