From: tnp@invalid.invalid   
      
   On 10/04/2024 14:12, Adrian wrote:   
   > In message , The Natural Philosopher   
   > writes   
   >> On 09/04/2024 22:19, Adrian wrote:   
   >>> 40 was probably a one off (heat wave), but mid 30s occur every summer   
   >>> month.   
   >>> I've been looking at fan cases, but they all seem to prevent the use   
   >>> of the HAT, which means I won't be able to find out what the ambient   
   >>> temperature is. I suppose I could design one of my own   
   >>   
   >> Seriously, you don't need a fan.   
   >>   
   >> Just a *ventilated* case.   
   >>   
   >> I am designing a case for mine right now, featuring a complete grille   
   >> in one end wall.   
   >>   
   >> Experience shows that as long as hot air can escape and draw in cooler   
   >> air, all will be well   
   >>   
   >   
   >   
   > Thanks.   
   >   
   > There appear to be several likely looking cases on Thingiverse (other   
   > sites available), so I suspect that I'll download one of those, and if   
   > needs be tweak it for my needs.   
   >   
   I'll try and post mine somewhere. Finished it last night,. It's working   
   well with two SSDS and a chip temp of around 65°C-75°C dependent on load.   
      
   $ vcgencmd measure_temp   
   temp=68.1'C   
      
   Can you tweak STLs?   
      
      
      
   > Adrian   
      
   --   
   “Politics is the art of looking for trouble, finding it everywhere,   
   diagnosing it incorrectly and applying the wrong remedies.”   
   ― Groucho Marx   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   
|