From: Vitsky.kasperski@gmail.com
On 16.08.2024 13:23, The Natural Philosopher wrote:
> On 16/08/2024 12:19, Jesper wrote:
>> On 16.08.2024 12:40, The Natural Philosopher wrote:
>>> On 16/08/2024 10:04, Jesper wrote:
>>>> On 01.08.2024 21:38, Björn Lundin wrote:
>>>>> On 2024-08-01 21:02, Jesper wrote:
>>>>>> On 01.08.2024 20:29, Ahem A Rivet's Shot wrote:
>>>>>>> On Thu, 1 Aug 2024 19:50:20 +0200
>>>>>>> Jesper wrote:
>>>>>>>
>>>>>
>>>>>> But I still do not know what a command that clones both sda1 and
>>>>>> sda2 to NVME should look like. Please?
>>>>>
>>>>> Really? It is given to you more than once
>>>>>
>>>>> dd if=/dev/sda of=/dev/nvme0n1 bs=1m
>>>>>
>>>>
>>>> Now I have the nvme installed and showing in a lsblk command.
>>>> Booted from a SD-card and did a few tries to copy the system from
>>>> SSD to nvme.
>>>> First there was a complaint about the switch "1m". Changed it to
>>>> "1b" and got a complaint about missing permission to open SDA (the
>>>> SSD I want to copy from). Threw a sudo at it, and it ran for maybe
>>>> half an hour, until it stopped with error "writing nvme0n1, No space
>>>> left on device".
>>>> The SSD and the nvme have the same size, and that seems to be a
>>>> problem.
>>>> Bright ideas are welcome :-)
>>>>
>>>> Below I have copied in what happend in the command line:
>>>> raspberrypi@raspberrypi:~ $ lsblk
>>>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
>>>> sda 8:0 0 238.5G 0 disk
>>>> ├─sda1 8:1 0 512M 0 part /med
a/raspberrypi/bootfs
>>>> └─sda2 8:2 0 238G 0 part /med
a/raspberrypi/rootfs
>>>> mmcblk0 179:0 0 58G 0 disk
>>>> ├─mmcblk0p1 179:1 0 512M 0 part /boot/firmware
>>>> └─mmcblk0p2 179:2 0 57.5G 0 part /
>>>> nvme0n1 259:0 0 238.5G 0 disk
>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1m
>>>> dd: invalid number: ‘1m’
>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1 bs=1b
>>>> dd: failed to open '/dev/sda': Permission denied
>>>> raspberrypi@raspberrypi:~ $ dd if=/dev/sda of=/nvme0n1
>>>> dd: failed to open '/dev/sda': Permission denied
>>>> raspberrypi@raspberrypi:~ $ sudo dd if=/dev/sda of=/nvme0n1 bs=1b
>>>> dd: error writing '/nvme0n1': No space left on device
>>>> 107929249+0 records in
>>>> 107929248+0 records out
>>>> 55259774976 bytes (55 GB, 51 GiB) copied, 1476.65 s, 37.4 MB/s
>>>> raspberrypi@raspberrypi:~
>>>>
>>>> Best regards
>>>
>> Thank you for the reply.
>>> WTF is '/nvme0n1' ?
>> "nvme0n1" is the "fucking" NVME I have installed in the raspi5.
>
> Not as far as dd is concerned.
> What does the outpout of
> ls /n*
raspberrypi@raspberrypi:~ $ ls /n*
ls: klarte ikke å åpne '/n*': Ingen slik fil eller filkatalog
It means "Could not open /n*. No such file or catalog"
> and
> ls /dev/n*
> show?
raspberrypi@raspberrypi:~ $ ls /dev/n*
/dev/ng0n1 /dev/null /dev/nvme0 /dev/nvme0n1
/dev/net:
tun
raspberrypi@raspberrypi:~ $
Should the nvme have been formatted before the copying? I did not do
that because the two partitions on the SSD have different formatting,
one is vfat (boot), the other ext4
Best regards
>
>
>>>
>>> It looks like you have created a file in the root directory of the
>>> device you are copying from....
>> I see no trace of the new file you are referring to.
>>
> Somehow that does not surprise me
>
>> Best regards
>>>
>>
>
--
Jesper
--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)
|
