home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   comp.sys.tandy      Life is dandy cuz you're gettin a Tandy!      5,684 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 3,967 of 5,684   
   Knut Roll-Lund to thewises   
   Re: 1100FD & 1.44 3.5" disks   
   05 Mar 06 02:59:36   
   
   From: kr-lund@nogarbage.online.no   
      
   thewises wrote:   
   > dgriffi@cs.csbuak.edu (Dave Griffith) wrote in   
   >>Have you tried taping over the HD hole on a 1.44 floppy?  It's not   
   >>supposed to work, but it sometimes does.   
   >   
   >   
   > Don't do it. HD floppies are coated with different material than DD   
   > floppies are, and DD drives don't have enough current to read them. Disks   
   > formatted this way won't last long. Look on Ebay. They always have plenty   
   > of brand-new DD 3.5" disks.   
      
   Your statement is misleading, it does work (for 3.5", using HD media as   
   DD) and there is no problem over time so far, the difference in coating   
   is very small. BTW The current you are mentioning is applied when   
   writing, not reading.   
      
   So do it if it is necessary, for testing or whatever. The tape should   
   typically be under the disk as the drive is sensing mechanically from below.   
      
   It is not as if the real thing would always work and last forever.   
      
   The only thing that will keep your data from rotting away is to have   
   backups.   
      
   On the other hand, I have bought DD floppies for use with my TRS-80s,   
   because it is more convenient and should work better (in theory). I even   
   bought them from computernews80, and recommend you to do the same.   
      
   What shouldn't be done is the opposite, to drill a hole in a DD sleeve   
   to use it as a HD. This would often give problems with formatting and   
   later fading. Note: This wouldn't be typical today but back when HD was   
   much more expensive than DD.   
      
   Note also that this applies only to 3.5". 5.25" have a big difference   
   between DD and HD media. Though formating DSDD 48TPI media with 80 track   
   seems to be no problem while DSDD 96TPI is what it should have been.   
   DSDD 96TPI is very unusual as it was not typically used on PC's (360K is   
   DSDD 48TPI and 1.2M is DSHD 96TPI.   
      
   Knut   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca