From: dave-ng@nospam.tld   
      
   Sometime on Tue, 15 Aug 2006 18:45:32 -0700, christianlott1 scribbled:   
      
   > How Many Files? 6   
      
   Dunno about that.  Just press Return.   
      
   > MEMORY SIZE? 48K   
   > Syntax Error   
   > MEMORY SIZE? 48000   
      
   Just press return unless you know you need to enter something.  The   
   "memory Size?" prompt is asking how much RAM you want to reserve for other   
   uses after BASIC has loaded.  You just told it to reserve the entire RAM,   
   more than is available to BASIC with DOS loaded.  For that matter, even in   
   Cassette BASIC, not much, if anything, would work with 48k reserved for   
   non-BASIC use.   
      
   > TRS-80 Model I Disk BASIC Rev 2.7DD   
   > (c)(p) 1981 by Tandy Corp. All Rights Reserved.   
   > Created 5-Jul-81   
   > 19,439 Free Bytes   6 Files   
   > READY   
   >>CMD"DIR :1"   
   > Syntax Error   
   > READY   
   >>   
   >   
   > I tried the same thing for TRSDOS21 and the thing accesses the disk   
   > then spits out a Z80 register dump!   
   >   
   > Very funny actually.   
   >   
   > Maybe I could email this to you and you could have a look at it.   
   --   
   Dave   
   Our business in life is not to succeed,   
   but to continue to fail in good spirits.   
                Robert Louis Stevenson   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)