From: srs@nosapm.com   
      
   On 4 Nov 2006 17:26:48 -0800, "N Morrison"    
   wrote:   
      
   >   
   >Knut Roll-Lund wrote:   
   >   
   >> IMHO the best thing would be to repair the machine. New tube?   
   >>   
   >> But, I think the timing is similar to a TV signal. One could probably   
   >> mix the two sync signals with the video signal with some logic and a   
   >> couple of transistors to get a composite signal. maybe one could use the   
   >> TV's scart plug and do it with the separate signals but they would have   
   >> to be the correct way (inverted correctly). It is an ugly solution though.   
   >   
   >I'm sure he's in the US so no SCART. However it is pretty much a US TV   
   >that is the monitor. It should be possible to hook up an RCA cable to   
   >the computer and to a TV to keep it running.   
      
   Hi Thanks For the replies,   
   Yea, am in the US and would just like to see if it is possible to   
   connect a VCR or TV (ntsc) or anything to keep it going.  I am   
   thinking the picture tube is going bad in th eoriginal unit.  I am   
   also worried about the supposed HOT frame of the chassis I am reading   
   about.   
   Any other suggestions?  Thanks alot guys/gals/PALs,   
   Steve   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)