From: cnoyes72@cox.net   
      
   On 9/6/07 12:15 AM, in article   
   46DF8CF1.242.tandy@theville.vintagecomputing.net, "Trash80"   
    wrote:   
      
   > Hi, will the 10 meg hard drive (25-1025) work with a Model 4?  I believe this   
   > drive was for the Model 2000 originally.   
   >   
   > Regards,   
   > Doug   
   > --   
   > The Ville - Where 8-bits meet 32.       Data: (902)442-2725  8N1  V.34   
   > FidoNet: 1:255/36                   Internet: theville.vintagecomputing.net   
   > --- Synchronet 3.14b-Linux NewsLink 1.85   
   > *  The Ville - Lower Sackville, NS - telnet://theville.vintagecomputing.net   
      
      
   Hello,   
      
     Since this unit doesn't have a controller built in it will not work as a   
   primary drive on a model 4 but I suspect it may work as a secondary drive   
   connected to a primary drive unit.  A primary drive unit will have the 50   
   pin HDC needed to connect to the IO bus of a model 4.   
      
   -CN   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)