From: dougandlissa@shaw.ca   
      
   Hi There,   
      
   I used XT4 under TRSDOS 6.x for years and had no trouble with file   
   transfers at 9600 baud.  I connected my 4P via a null modem to an 8086   
   and transferred data files with no errors - I transferred the .DAT files   
   for INFOCOM adventures from MSDOS to NEWDOS and played them on my 4P   
   (all that was required was to change the executable filename to the same   
   at the .DAT filename).   
      
   Doug   
      
   Trash80 wrote:   
   > Hi,   
   >   
   > Can anyone recommend a term program for the Model 4 that will reliably work   
   > with a modem at 9600 baud?  I've been using FastTerm II and Omniterm Plus   
   > reliably at 2400 baud.  4800 sometimes works and anything above that doesn't.   
   >   
   > Regards,   
   > Doug   
   > --   
   > The Ville - Where 8-bits meet 32.       Data: (902)442-2725  8N1  V.34   
   > FidoNet: 1:255/36                   Internet: theville.vintagecomputing.net   
   > --- Synchronet 3.14b-Linux NewsLink 1.85   
   >  *  The Ville - Lower Sackville, NS - telnet://theville.vintagecomputing.net   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)