home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   comp.sys.tandy      Life is dandy cuz you're gettin a Tandy!      5,684 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 4,769 of 5,684   
   Ralf Folkerts to All   
   Catweasel, Linux Problem   
   10 Jan 08 11:13:49   
   
   From: ralffmail-news1@yahoo.de   
      
   Hi,   
      
   today I get a Catweasel Mk4 to write Floppy-Images to disks.   
      
   Unfortunately, the dmk2cw (and dmk2cw) Tools claim not to "find" the   
   Catweasel on the PCI Bus. However, it "should" be there :-(   
      
   I then put the Catweasel into a Windows 2000 machine; it was detected   
   correctly at boot. After Installation of the Drivers I was also able to   
   start the Imagetool that came with the Catweasel - as I have no real   
   Amiga Disks, but when I started to read a bulk-erased Floppy the Drive   
   was (correctly) accessed.   
      
      
   Back on the Linux-Box, I still doesn't work. In lspci I see one Dev   
   which should be the Catweasel:   
      
   00:0a.0 Communication controller: Tiger Jet Network Inc. Tiger3XX   
   Modem/ISDN interface   
            Subsystem: Unknown device 5213:0002   
            Flags: bus master, medium devsel, latency 32, IRQ 10   
            I/O ports at d800 [size=256]   
            Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]   
            Capabilities: [40] Power Management version 2   
      
   I also tried to add a "pci=routeirq" Kernel-Parameter but that didn't   
   help, too :-(   
      
   The exact Error-Message:   
      
   penguin cw2dmk-4.3 # ./cw2dmk -d 0 /dev/null   
   cw2dmk 4.3   
   Failed to detect Catweasel MK3/4 on PCI bus; looking for MK1 on ISA bus   
   at 0x320   
   cw2dmk: Failed to detect Catweasel at port 0x320   
      
   In the cw2dmk-Sources (cwpci.c) I found a PCI-ID that seems OK:   
        case 0x00025213:    /* Catweasel MK4 */   
      
      
   Oh...   
      
   ... just did a "make clean all"   
      
   and got   
      
   gcc -O3 -Wall   -c -o cwpci.o cwpci.c   
   cwpci.c: In function `pci_find_catweasel':   
   cwpci.c:249: error: `NULL' undeclared (first use in this function)   
   cwpci.c:249: error: (Each undeclared identifier is reported only once   
   cwpci.c:249: error: for each function it appears in.)   
   make: *** [cwpci.o] Error 1   
      
   Does anyone have a hint? Is it a Problem of the Compiler bing used?   
      
   penguin cw2dmk-4.3 # cc --version   
   gcc (GCC) 3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.9)   
   Copyright (C) 2006 Free Software Foundation, Inc.   
   This is free software; see the source for copying conditions.  There is NO   
   warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.   
      
   The OS is Gentoo-Linux, Kernel   
      
   penguin cw2dmk-4.3 # uname -r   
   2.6.21-gentoo-r3   
      
   Would be really great to get that fixed!   
      
      
   Cheers,   
   _ralf_   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca