2218e470   
   From: si@si.si   
      
   On Sun, 10 Feb 2008 01:55:37 -0800 (PST), Mal    
   wrote:   
      
   >On Feb 10, 2:55 am, "thom527"  wrote:   
   >> Greetings!   
   >>   
   >> I have been looking for some time to purchase a flat cable that connects   
   >> expansion interface to floppy drive. Any suggestions?   
   >>   
   >> thanks in advance   
   >>   
   >> Manuel   
   >   
   >Two options: Either make the cable yourself, or try one of the vendors   
   >who sell cables on eBay.  I have previously found "twlf2" helpful for   
   >made-to-order cables (though the cost of frieght to Australia proved   
   >too expensive).  If you need an email address for twlf2, let me know.   
   >If you make the cable yourself, note that some pins need to be removed   
   >from the connectors (drive select is achieved by this means). If you   
   >need more details, I am happy to help.   
   Hi   
   I was just reading on a TRS yahoo group that if you connect a TRS-80   
   with a EI that needs a buffered cable tahat you short out the supply   
   voltage.   
   So you better make sure what your EI needs. I am sure that you can   
   find this out based on the partnumber or serialnumber.   
   Bu   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)