From: martians@sdf.lNoOnSePsAtMar.org   
      
   >"tandyclassics"  wrote in message   
   > Does anyone know of a dial up BBS in the U.S. that will still connect   
   > at 300 baud (yes, I said "baud" :-) ?  I've got an old Tandy 600 and   
   > am trying to see if I can get it to connect to a BBS.  My luck so far   
   > has been that it attempts to connect and then it aborts.  I'm guessing   
   > that not too many modern modems would connect at 300bps.   
      
   Most of the dialup networks out there do not support anything slower than   
   9600 BPS and require PPP.  However, there is at least sdf.lonestar.org   
   that supports login at 1200 bps in most area codes in the USA.  As far as   
   doing 300bps or slower, you'll probably need to find very specific to   
   that.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)