From: grinder@no.spam.maam.com   
      
   I've been attempting to load an asm cassette image (SPWAR.CAS) into   
   David Keil's TRS-80 Model III/4/4P emulator.  If anyone has had   
   experience adjacent to this, I would appreciate some help.   
      
   It's been awhile since I used a Model III/4, so my recollection of how   
   it's properly done is a bit shakey, but this sounds familiar:   
      
   1) Boot into cassette basic.   
      
   2) Run SYSTEM monitor.   
      
   3) Load asm in monitor by typing "filename" or * in at the *? prompt.   
   If you have the tape properly cued and the baud rate set, you'll see a   
   pair of asterisks in the upper right hand corner of the screen.   
      
   4) When the load is done, jump into the loaded code with \   
      
   I'm falling down on step 3.  One of the progress asterisks changes to a   
   C, and the load prematurely (I think) stops.   
      
   I've also tried the Model I emulator and SPWAR1.CAS, but I've not had   
   any luck with that either.   
      
   On a related note: It looks like Ira Goldklang's site at one time had   
   manuals and a CMD version of this game, but I can't see how to actually   
   get the files.  Does anyone know where the archive has gone?   
      
   Thanks for your time and consideration.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)