From: turnkit@gmail.com   
      
   On Monday, July 21, 2014 10:05:39 AM UTC-5, Thomas Lake wrote:   
   > Thank you George and Al! My unit is a converted Model III and it does have   
   the tiny, orange trim pot on the motherboard. I adjusted it (more like just   
   touched it with the adjustment tool!) and now the computer boots up fine every   
   time.   
   > The only thing left is to figure out how to use double-sided disk drives in   
   this machine. I can replace the single-sided drives with double-sided and they   
   work fine in single-sided mode.   
      
   You can also put 800K 3.5" floppy drives in and run them as quad density -- 80   
   track, double density double sided (I think that's QD, but maybe that's the   
   wrong term.)  At any rate if you can find a 1.44 MB drive then look for a 800K   
   jumper.  There may    
   be instructions online for this but 3.5" media might be a little more durable   
   or easier to find and faster possibly too.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)