From: tomlake07@gmail.com   
      
   On Tuesday, October 18, 2016 at 10:54:12 AM UTC-4, laf...@gmail.com wrote:   
   > Are you trying to load BASIC or ML (machine language) tapes?  If the latter,   
   the tape loading may be overwriting DOS in low memory, locking the machine.    
   If ML, try using the TAPE command   
   >   
   > TAPE (s=source, d=destination)   
   >   
   > T=tape   
   > D=disk   
   > R=RAM   
   >   
   > TAPE (s=t,d=d)   
   > Will load the tape and save to disk. File name is read off the tape, and   
   /CMD is appended when written to disk.   
   >   
   > BASIC programs should use CLOAD and CSAVE, as in Level II BASIC.   
   >   
   > Hope this helps   
   >   
   > Larry   
      
   Mea Culpa. I should have been more specific. I can't even load BASIC tapes   
   made with the same recorder. These tapes load fine in Level II whether the EI   
   is on or off but won't load in Disk BASIC even when the RTC is stopped.   
      
   Tom L   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)