TID: FMail-lnx64 2.1.0.18-B20170815
RFC-X-No-Archive: Yes
TZUTC: 0200
CHRS: UTF-8 2
PID: GED+LNX 1.1.5-b20161221
MSGID: 2:280/464 6167d677
REPLY: 1:229/426.52 ac0a4f8a
Hi Andy,

On 2021-10-13 18:45:48, you wrote to All:

 AG> I was wondering if anyone had any best practices for setting up
 AG> polling of other systems.  Do most setup a schedule for each of the
 AG> systems or use a batch file and use dbutil?  I can see the benfit of
 AG> using a batch file. Just curious on how the verterans handle this.

Best practice is not to poll, but deliver available mail directly (both
ways)...

Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
 * Origin: FMail development HQ (2:280/464)
SEEN-BY: 1/123 14/0 90/1 103/705 105/81 114/709 120/340 123/131 124/5016
SEEN-BY: 129/305 153/757 154/10 203/0 221/0 226/30 227/114 702 229/424
SEEN-BY: 229/426 428 450 550 664 700 240/1120 5138 5411 5824 5832
SEEN-BY: 240/5853 249/1 206 317 400 280/464 5003 282/1038 292/854
SEEN-BY: 292/8125 301/1 317/3 320/219 322/757 342/200 396/45 423/120
SEEN-BY: 633/280 2452/250 2454/119
PATH: 280/464 240/5832 229/426