TZUTC: -0700
MSGID: 109.dos@1:218/700 23d5dffe
REPLY: 2:240/1120.976 21ceb2c0
PID: Synchronet 3.18a-Win32  May 30 2020 MSC 1925
TID: SBBSecho 3.11-Win32 r3.173 May 30 2020 MSC 1925
CHRS: ASCII 1
-=> Charles Pierson wrote to All <=-

 CP> I've installed a couple of Point programs, specifically D'Bridge and
 CP> OpenXP 4.0,  but I can't figure out what I need to do to get it to see
 CP> my wifi.

The fork of DOSBOX I use at home has NE2000 emulation using pcap; you
don't see the wifi directly in DOSBOX. That makes sense, actually,
since the NE2000 is a common card, and there's packet drivers and
support in old DOS environments. You might not find DOS drivers for a
new wifi card if DOSBOX just passed it through.



... Start where you are. Use what you have. Do what you can.
--- MultiMail/XT v0.52
 * Origin: http://realitycheckbbs.org | tomorrow's retro tech (1:218/700)
SEEN-BY: 1/19 123 10/0 1 15/0 16/0 19/36 20/4609 90/1 102/401 103/705
SEEN-BY: 106/201 116/18 120/331 340 123/130 131 140 128/2 153/7715
SEEN-BY: 214/22 218/0 1 401 410 700 720 802 810 820 221/0 222/2 226/30
SEEN-BY: 227/114 702 229/424 426 664 1016 230/150 152 240/1120 5411
SEEN-BY: 240/5832 249/1 206 317 400 250/1 261/38 100 266/512 267/155
SEEN-BY: 275/100 282/1031 1056 291/100 111 317/3 320/219 322/0 757
SEEN-BY: 340/400 341/66 342/200 396/45 640/1321 712/848 801/161 189
SEEN-BY: 2320/105 3634/12 5020/1042
PATH: 218/700 261/38 320/219 240/5832 229/426