TID: FMail-lnx64 2.3.2.4-B20240523
RFC-X-No-Archive: Yes
TZUTC: 0200
CHRS: CP850 2
PID: GED+LNX 1.1.5-b20240604
MSGID: 2:280/464 68221fe6
REPLY: 2:250/1@fidonet 6822167a
Hi Vincent,

On 2025-05-12 16:38:05, you wrote to me:

 >> Synchronet has it too. It used to be a bit quirky, like only doing a
 >> rescan of all connected areas, but that might be fixed in the current
 >> release. Mystic has it too, but I have no experience with it.

 VC> Likewise with mbse also has RESCAN for echos

Good to know!

 VC> but while I do have all active echos I have a date and volume limit as
 VC> to what is retained.

Most of my areas are unlimited since a decade or two. ;-)

 VC> To do a RESCAN user must be using a fido address linked in here along
 VC> with a session password.

Of course!

 VC> This can be as a point if registered as such with their host site.

That could be dangerous if you don't know what you are doing. You could export
all rescanned messages back into the net, and cause a massive dupe dump...


Bye, Wilfred.

--- FMail-lnx64 2.3.2.4-B20240523
 * Origin: FMail development HQ (2:280/464)
SEEN-BY: 103/705 105/81 106/201 124/5016 128/187 129/14 305 153/757
SEEN-BY: 153/7715 154/10 30 110 203/0 218/700 221/0 226/30 227/114
SEEN-BY: 229/110 114 200 206 300 307 317 400 426 428 470 664 700 705
SEEN-BY: 240/1120 5832 266/512 280/464 5003 5006 291/111 292/854 8125
SEEN-BY: 301/1 310/31 320/219 322/757 341/66 234 342/200 396/45 423/120
SEEN-BY: 460/58 467/888 633/267 280 281 384 410 418 509 2744 712/848
SEEN-BY: 770/1 902/26 5020/400 5075/35
PATH: 280/464 633/280 229/426