MSGID: 1:340/1101 010f1917
PID: THE READER V4.50 [freeware]
NOTE: IceEdit 2.35 K96741
TID: FastEcho 1.46.1 43288
What do I need to run to send to all of my uplinks and route if needed?  I
can't just run "fastecho pack" or "fastecho pack -p", my netmail to 30:30/99
can't be packed as it's email handled by irex's gateway.  I'm running:

fastecho pack via 1:340/400 via 1:229/426 via 2:221/0 via 10:103/0 via
21:1/10 via 21:2/100 via 38:503/1 via 42:17/1 via 618:300/1 via 618:100/1
fastecho pack via 911:1423/0 via 1337:3/100 via 316:36/1
fastecho pack -P via 1:340/400 via 1:229/426 via 2:221/0 via 10:103/0 via
21:1/10 via 21:2/100
fastecho pack -P via 38:503/1 via 42:17/1 via 618:300/1 via 618:100/1 via
1337:3/100 via 316:36/1 via 911:1423/0

Should I be using via, or does that send everything via the first address?
Or should I not be using via?  I've tried that as well.  I also don't know if
I need to run the pack and pack -p for each node.

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,999)


*** THE READER V4.50 [freeware]
---
 * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)
SEEN-BY: 105/81 106/201 128/10 187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 114 206 317 400 426 428 470 664 700
SEEN-BY: 229/705 266/512 291/111 292/854 300/6 320/219 322/757 340/0
SEEN-BY: 340/101 400 800 1100 1101 342/200 396/45 60 460/58 712/848
SEEN-BY: 902/26 5075/35
PATH: 340/1101 400 128/187 229/426