TZUTC: 0200
CHRS: CP850 2
MSGID: 2:301/123 60981030

   Hello everybody!

I have resurrected my Fidonet node, so far, so good. And while everything
seems to be running fine on a Windows based server, including GoldEd+, I
wanted to run the editor natively on my Mac. I'm running the latest "Big Sur"
version.

Now for the tricky part - not sure if that's actually possible. I have, for
example, an areas.bbs that gets automatically generated by FMail. It looks
like this:
******
2:301/123 ! Fermin Sanchez
; Created by FConfig-W32-2.0.1.2 - Sun May 09 18:05:12 2021
!C:\BBS\msgbase\allfix_file    ALLFIX_FILE          2:301/1
!C:\BBS\msgbase\cooking        COOKING              2:301/1
!C:\BBS\msgbase\earth          EARTH                2:301/1
!C:\BBS\msgbase\ebbauser.ger   EBBAUSER.GER         2:301/1
... (etc...)
******

My functioning GoldEd.cfg on my Windows server has various entries that use
the typical Windows paths, for example:
******
#Area definitions
AREADEF Netmail "NETMAIL" 0 Net OPUS C:\BBS\netmail
AREAFILE AreasBBS c:\bbs\msgbase\areas.bbs
******

I therefore tried using "MAPPATH" on my Macs golded.cfg to rewrite whatever
c:\.... to /Volumes/bbs/....:
*******
#Info about me
USERNAME Fermin Sanchez
ADDRESS 2:301/123
AKA  2:301/123@fidonet.org
NICKNAME Fermin

#Special for Mac
MAPPPATH c:\bbs\ /Volumes/bbs/
MAPPPATH c:\bbs\config\ /Volumes/bbs/config/
MAPPPATH c:\bbs\GoldEd\ /Volumes/bbs/GoldEd/
MAPPPATH c:\bbs\msgbase\ /Volumes/bbs/msgbase/
MAPPPATH c:\bbs\netmail\ /Volumes/bbs/netmail/
MAPPPATH c:\bbs\nodelist\ /Volumes/bbs/nodelist/
********

Nope, doesn't seem to work. GoldEd creates the JAM database files including
their paths on my Mac:
********
fermin@MBPHome bin % ls -lsa
total 7240
   0 drwxr-xr-x@ 68 fermin  staff     2176 May  9 18:31 .
   0 drwxr-xr-x   5 fermin  staff      160 May  9 18:09 ..
  16 -rw-r--r--@  1 fermin  staff     6148 May  9 18:30 .DS_Store
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\allfix_file.jdx
   8 -rw-r--r--   1 fermin  staff     1024 May  9 18:30 C:\BBS\m
gbase\allfix_file.jhr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\allfix_file.jlr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\cooking.jdx
   8 -rw-r--r--   1 fermin  staff     1024 May  9 18:30 C:\BBS\m
gbase\cooking.jhr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\cooking.jlr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\earth.jdx
   8 -rw-r--r--   1 fermin  staff     1024 May  9 18:30 C:\BBS\m
gbase\earth.jhr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\earth.jlr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\ebbauser.ger.jdx
   8 -rw-r--r--   1 fermin  staff     1024 May  9 18:30 C:\BBS\m
gbase\ebbauser.ger.jhr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\ebbauser.ger.jlr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\essnasa.jdx
   8 -rw-r--r--   1 fermin  staff     1024 May  9 18:30 C:\BBS\m
gbase\essnasa.jhr
   0 -rw-r--r--   1 fermin  staff        0 May  9 18:30 C:\BBS\m
gbase\essnasa.jlr
********

Is what I'm trying to do even possible? The server would remain on Windows,
including a local copy of GoldEd if needed. But I'd like to be able to
remotely access the system using a native version of GoldEd on my Mac.

Regards
Fermin


... Hey @TOFIRST@, watch me pull a Tagline outta this hat.
--- GoldED+/W64-MSVC 1.1.5-b20180707
 * Origin: 2:301/123  (2:301/123)
SEEN-BY: 1/123 18/200 30/0 90/1 105/81 120/340 123/131 129/305 221/6
SEEN-BY: 226/30 227/114 229/101 424 426 452 664 700 1016 1017 240/1120
SEEN-BY: 240/5832 249/206 317 400 280/464 282/1038 292/854 301/0 1
SEEN-BY: 301/101 103 113 123 812 317/3 322/757 342/200 633/280 5058/104
PATH: 301/123 1 229/426