TID: FMail-W64 2.2.0.0
TZUTC: 0200
CHRS: UTF-8 4
MSGID: 2:341/234.1 6497f320
REPLY: 2:221/1.0 64855f16
11 Jun 2023 08:43, you wrote to me:

 CN>> However I've found that you can have 2 points of the same
 CN>> bossnode. The trick is using point .0 for the uplink of the
 CN>> second one.

 CN>> - First point, uplink 2:345/678
 CN>> - Second point, uplink 2:345/678.0
 TK>  And if you for some strange reason need more than two, you can have
 TK> "a point of a point". (The boss node in hotdoged can be a point
 TK> address, even if it says boss 3D ftn address in setup). Just set up as
 TK> many point aka's to the main boss as you want. :)

I see. Nice to know :-)

A reason for having several points in a HotdogEd instance would be being able
to use different encodings for receiving echos. For example, CP866 for RU
areas on point A, and CP437, UTF-8 or other on point B for the rest of areas.

HotdogEd allows you to set a specific charset (codepage) for each area
(group), but it only works for exporting echomail. For incoming messages, it
uses the global Codepage in the point's Server settings.

Carlos

--- GoldED+/W32-MSVC 1.1.5-b20180707
 * Origin: cyberiada (2:341/234.1)
SEEN-BY: 1/123 15/0 90/1 105/81 106/201 123/131 153/757 7715 154/10
SEEN-BY: 218/700 840 220/70 221/1 6 226/17 30 227/114 229/110 112
SEEN-BY: 229/113 206 307 317 400 426 428 452 470 664 700 266/512 267/800
SEEN-BY: 282/1038 291/111 301/1 317/3 320/219 322/757 335/364 341/66
SEEN-BY: 341/234 342/200 396/45 633/267 280 281 412 418 712/848 770/1
SEEN-BY: 770/100 340 772/220 230 5075/35
PATH: 341/234 221/6 218/840 770/1 712/848 633/280 229/426