TZUTC: 0200
MSGID: 2:341/234.123 657f66de
PID: Hotdoged/2.13.5/Android
TID: jNode/Android
CHRS: UTF-8 4
REPLY: 2:50/700 d1c4fb01
Hello, Oleg Nazaroff.
On 12/10/23 14:37 you wrote:

 CN>> The FAQ says: However I've found that you can have 2 points of    
 CN>> the same bossnode. The trick is  using point .0 for the uplink of 
 CN>> the second one. - First point, uplink 2:345/678 - Second  point,  
 CN>> uplink 2:345/678.0
 ON> But it only works from different devices :)

It works for me. This is the second point in my phone, with uplink 2:341/234.0

I've tested a bit more and found that this only works if both points have the
same password - when polling the bossnode, it seems it uses the one defined in
the main point.

Another issue is, if you use Manage subscription on the second point, the
netmails to areafix that it generates are stored in the first point's Outgoing
folder, and they are sent via that one. (But it works.)


 ON> Personally from one device I have this setting takes out node     
 ON> completely and no mail goes :)

Oh, I hope it didn't break too much and you could restore it... I haven't
tried using node addresses.

 ON> --
 ON> С наилучшими пожеланиями! Virtual HotDog ---
ХотДог/2.14.5/Android 
 ON> * Origin: Android device, Milky Way (2:50/700)

--
Best regards!
Posted using Hotdoged on Android
--- Hotdoged/2.13.5/Android
 * Origin: Android device, Milky Way (2:341/234.123)
SEEN-BY: 1/123 10/0 1 15/0 80/1 90/1 103/705 105/81 106/201 123/131
SEEN-BY: 153/7715 154/10 218/0 1 601 700 870 920 930 221/1 6 226/30
SEEN-BY: 227/114 229/110 112 113 206 307 317 400 426 428 452 470 664
SEEN-BY: 229/700 240/1120 266/512 282/1038 291/111 301/1 113 812 305/3
SEEN-BY: 317/3 320/219 322/757 335/364 341/66 234 342/200 396/45 633/280
SEEN-BY: 712/848 5020/1042 5075/35
PATH: 341/234 221/6 301/1 218/700 229/426