TZUTC: 0100
MSGID: 649.fidonet_internet@2:250/3 2a9079c2
REPLY: 2:221/1.58@fidonet 1398d201
PID: Synchronet 3.20a-Linux master/2bae9a96e Apr 23 202 GCC 8.5.0
TID: SBBSecho 3.20-Linux master/2bae9a96e Apr 23 2024 08:15 GCC 8.5.0
COLS: 80
BBSID: MAGNUMUK
CHRS: ASCII 1
NOTE: FSEditor.js v1.105
  Re: fibre experience, anyone?
  By: August Abolins to All on Sat Apr 20 2024 08:40:00

Hi,

 > With two spare "unassigned"
 > ports, that seemed strange to the tech.  He was simply told
 > that they weren't available to use.

I am sure the rules vary wildly between providers and locations but, assuming
this is a PON based service, it's possible that they would have a rule to
leave one port free on each splitter to move a customer onto in case of a
fault? Splitters don't tend to go faulty but you never know.

Some providers will also leave a reflector on one port of each splitter to
allow them to run OTDR tests, again not all that common but who knows?

I'd have thought the installer would know about either of these cases, though,
so my best guess would be admin error :)

BobW
--- SBBSecho 3.20-Linux
 * Origin: >>> Magnum BBS <<< - bbs.magnum.uk.net (2:250/3)
SEEN-BY: 1/120 15/0 18/0 25/0 21 90/1 103/705 105/81 106/201 116/116
SEEN-BY: 120/616 123/0 10 25 126 180 200 525 755 3001 124/5016 128/260
SEEN-BY: 129/305 135/115 220 225 153/757 7715 154/10 30 40 50 700
SEEN-BY: 203/0 218/700 220/90 221/0 6 222/2 226/30 70 227/114 229/110
SEEN-BY: 229/112 113 206 275 307 317 400 426 428 470 550 664 700 240/1120
SEEN-BY: 240/5832 250/0 1 3 4 5 6 7 8 11 13 14 15 263/0 266/512 275/1000
SEEN-BY: 280/464 5003 282/1038 291/111 292/854 8125 299/6 301/1 310/31
SEEN-BY: 320/219 322/757 341/66 234 342/200 396/45 423/120 460/58
SEEN-BY: 460/256 1124 467/4 888 633/280 712/848 1321 770/1 2320/105
SEEN-BY: 3634/0 12 27 56 57 119 5020/400 1042 5054/30 5075/35
PATH: 250/3 1 3634/12 154/10 280/464 460/58 229/426