MSGID: 2:240/1120.29 4e5efa8e
CHRS: CP850 2
TZUTC: 0100
REPLY: 2:280/5555 62375895
//Hello Michiel,//

on *20.03.22* at *16:30:02* You wrote in Area *IPV6*
to *Tim Schattkowsky* about *"WinPoint & IPv6"*.

 MvdV> Hello Tim,

 MvdV> On Friday March 18 2022 00:37, you wrote to me:

 TS>> Let us know if it works for you.

 MvdV> Here is the report:

 MvdV> 1) I created a host name for my system with only an AAAA record.
 MvdV> Rinaldo configured that host name in his WinPoint config. Rinaldo
 MvdV> polled with the IPv6 address.

 MvdV> 2) I added an A record to that host name. Rinaldo polled with IPv6.

 MvdV> 3) I removed the AAAA record for the host name. Rinaldo  polled with
 MvdV> IPv4.

 MvdV> 4) I added the AAAA record back in. Rinaldo polled with IPv6.

 MvdV> 5) I removed the A record. Rinalodo polls with IPv6.

 MvdV> Conclusion: Winpoint follows the OS if the OS is configured to do IPv6
 MvdV> first if the host is reachable by IPv6 and IPv4. If only one of the two
 MvdV> is available WinPoint uses that. All as expected.

 MvdV> What was not tested was the case that the OS is configured to try IPv4
 MvdV> first.

Great! Thanks for your efforts and for sharing your experience!

Regards,
Tim

--- WinPoint 408.1
 * Origin: Original WinPoint Origin! (2:240/1120.29)
SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 124/5016 129/331
SEEN-BY: 153/757 7715 154/10 203/0 218/700 840 220/70 221/1 6 360
SEEN-BY: 226/17 30 229/110 206 317 400 424 426 428 550 664 700 230/0
SEEN-BY: 240/1120 1634 1895 5832 8002 8005 266/512 267/800 280/464
SEEN-BY: 280/5003 5006 5555 282/1038 291/111 292/854 8125 301/1 310/31
SEEN-BY: 313/41 317/3 320/219 322/757 335/364 341/234 342/200 371/0
SEEN-BY: 382/147 396/45 423/81 120 460/58 530/306 633/267 280 281
SEEN-BY: 633/410 412 416 509 640/1384 712/848 770/1 100 340 772/210
SEEN-BY: 772/220 230 2452/250 5020/545
PATH: 240/1120 221/1 280/464 770/1 633/280 229/426