REPLY: 1:214/23@fidonet 62e6765c
MSGID: 2:280/5003.4 62e68b5d
CHRS: LATIN-1 2
TZUTC: 0200
TID: hpt/lnx 1.9.0-cur 2019-12-05
Hello Ray!

31 Jul 22 05:22, you wrote to Michiel van der Vlist:

 MV>> f     Has a ::f1d0::: style host address.
 MV>>       (zone, net, node in decimal notation)

 RQ> I once had mine set up for this. For the life of me, I cannot find out
 RQ> what I did to make it work. It seems that I failed to backup the network
 RQ> settings when "upgrading" the last time. Can someone point me in the right
 RQ> direction? Using Debian 11 (bullseye)

 I added something like this to /etc/network/interfaces.
 Ignore the fact that I use a vlan, just use the interface name you use.

 iface vlan102 inet6 auto
   pre-up ip token set ::f1d0:2:280:5003 dev $IFACE

Kees

--- GoldED+/LNX 1.1.5--b20180707
 * Origin: As for me, all I know is that, I know nothing. (2:280/5003.4)
SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 124/5016 129/331
SEEN-BY: 153/757 7715 154/10 203/0 218/700 221/0 1 226/30 229/110
SEEN-BY: 229/111 112 113 206 317 400 424 426 428 470 550 664 700 240/5832
SEEN-BY: 266/512 280/464 2030 5003 5006 5555 282/1038 292/854 8125
SEEN-BY: 301/1 310/31 317/3 320/219 322/757 341/66 234 342/200 396/45
SEEN-BY: 423/120 460/58 633/267 280 281 410 412 416 418 420 509 712/848
SEEN-BY: 770/1 2452/250 5020/545
PATH: 280/5003 464 633/280 229/426