REPLY: 1:214/23@fidonet 62e6765c
MSGID: 2:280/5003.4 62e692e7
CHRS: LATIN-1 2
TZUTC: 0200
TID: hpt/lnx 1.9.0-cur 2019-12-05
Hello Ray!

31 Jul 22 05:22, you wrote to Michiel van der Vlist:

 MV>> f     Has a ::f1d0::: style host address.
 MV>>       (zone, net, node in decimal notation)

 RQ> I once had mine set up for this. For the life of me, I cannot find out
 RQ> what I did to make it work. It seems that I failed to backup the network
 RQ> settings when "upgrading" the last time. Can someone point me in the right
 RQ> direction? Using Debian 11 (bullseye)

 Even more simple. On a Raspberry Pi I use just.

-----------------
 auto eth0
 iface eth0 inet dhcp
    pre-up ip token set ::f1d0:2:280:5006 dev $IFACE
----------------

Kees

--- GoldED+/LNX 1.1.5--b20180707
 * Origin: As for me, all I know is that, I know nothing. (2:280/5003.4)
SEEN-BY: 1/19 123 15/0 16/0 19/37 90/1 105/81 106/201 120/340 123/130
SEEN-BY: 123/131 124/5016 129/331 153/757 7715 154/10 201/0 203/0
SEEN-BY: 203/2 124 218/700 221/0 1 226/30 229/110 111 112 113 206
SEEN-BY: 229/317 400 424 426 428 470 550 664 700 230/0 240/5832 266/512
SEEN-BY: 280/464 2030 5003 5006 5555 282/1038 292/854 8125 301/1 310/31
SEEN-BY: 317/3 320/119 219 319 322/0 757 341/66 234 342/200 396/45
SEEN-BY: 423/120 460/58 633/280 712/848 770/1 2452/250 3634/24 5020/545
PATH: 280/5003 464 203/0 320/219 229/426